-
TECHNOLOGY
It might look
simple – but it isn't
The principle is simple: a separation liquid is developed to penetrate
between the layers of a multi-layer system. The liquid breaks this
system up separating it into individual layers. and "burst"
this open, separating the individual layers. However,
the trick is in the "composition" of this magic separation liquid.
Separating composite
materials using
separation liquids
saperatec develops highly-specialized separation liquids based
on chemical mixtures for different applications.
The separation liquid channels its way between
the layers of the composite material, where its full effect
unfolds, resulting in the separation of the composite.
The separation
process
The entire process for recovery of obtaining saleable products
from composite waste is as follows:
01 CRUSHING
The first stage is to reduce the size of the material to create as
much contact surface for the separation liquid as possible and to
simplify material handling during the process.
02 SAPERATEC SEPARATION LIQUID
The core process involves treating the shredded composite material
in the separation liquid. The separation process is
conducted by stirring and warming up until the individual fractions
("products") are completely separated.
03 WASHING
First the products are screened out and the separation liquid is
reconditioned. Then the products are cleaned from
adhesions of chemicals with washing water
and the washing water is also reconditioned.
04 SORTING
The now clean products are sorted using conventional procedures
(float-sink, sifting, …) and obtained individually.
05 DRYING
Another final drying and occasionally follow-up treatments
are required, if necessary, to make the products saleable.
-
TECHNOLOGY
It might look
simple – but it isn't
The principle is simple: a separation liquid is developed to penetrate
between the layers of a multi-layer system. The liquid breaks this
system up separating it into individual layers. and "burst"
this open, separating the individual layers. However,
the trick is in the "composition" of this magic separation liquid.
Separating composite
materials using
separation liquids
saperatec develops highly-specialized separation liquids based
on chemical mixtures for different applications.
The separation liquid channels its way between
the layers of the composite material, where its full effect
unfolds, resulting in the separation of the composite.
The separation
process
The entire process for recovery of obtaining saleable products
from composite waste is as follows:
01 CRUSHING
The first stage is to reduce the size of the material to create as
much contact surface for the separation liquid as possible and to
simplify material handling during the process.
02 SAPERATEC SEPARATION LIQUID
The core process involves treating the shredded composite material
in the separation liquid. The separation process is
conducted by stirring and warming up until the individual fractions
("products") are completely separated.
03 WASHING
First the products are screened out and the separation liquid is
reconditioned. Then the products are cleaned from
adhesions of chemicals with washing water
and the washing water is also reconditioned.
04 SORTING
The now clean products are sorted using conventional procedures
(float-sink, sifting, …) and obtained individually.
05 DRYING
Another final drying and occasionally follow-up treatments
are required, if necessary, to make the products saleable.